Raspberry Pi

From uGFX Wiki
Revision as of 17:47, 21 August 2016 by Tectu (Talk | contribs) (Introduction)

Jump to: navigation, search

µGFX applications can run natively (without emulation/simulation) on any Linux system. This means that µGFX can run without any problems on a Raspberry Pi. This is a step-by-step setup & configuration guide that will explain everything necessary to run µGFX on a Raspberry Pi.

Introduction

The most common question asked in this context is why to run µGFX on an embedded Linux device. Today's single board computers running Linux are powerful enough to run X and a complete desktop environment. Therefore, GUI applications can be written using desktop GUI frameworks such as Qt or GTK. Running µGFX instead on such as system has two main, but very important advantages:

  • Dependencies: Installing X, a desktop environment all required desktop applications and the required libraries to run custom built desktop applications pull many dependencies.
  • Resource requiremenets: ToDo

Used utilities

The following utilities will be used in this tutorial:

However, this guide has been kept as generic as possible. Following the same steps should allow running µGFX on any embedded Linux system.