Using ChibiOS/RT

From uGFX Wiki
Revision as of 14:53, 1 July 2014 by Tectu (Talk | contribs) (Created page with "It is fairly easy to include µGFX into your ChibiOS/RT project as ChibiOS/RT uses Makefiles internally as well. The ChibiOS/RT Makefile has to be modified as the following:...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

It is fairly easy to include µGFX into your ChibiOS/RT project as ChibiOS/RT uses Makefiles internally as well. The ChibiOS/RT Makefile has to be modified as the following:

  1. Include the µGFX top-level Makefile
  2. Include the driver or board Makefiles that match your hardware
  3. Add GFXSRC to the CSRC variable
  4. Add GFXINC to the INCDIR' variable


Example

The following Makefile is just an example showing how an existing Makefile has to be modified following the steps above. Please DO NOT copy the entire Makfile. The relevant parts have been highlighted.

##############################################################################
# Build global options
# NOTE: Can be overridden externally.
#
# Compiler options here.
ifeq ($(USE_OPT),)
  USE_OPT = -O3 -ggdb -fomit-frame-pointer -falign-functions=16
endif
# C specific options here (added to USE_OPT).
ifeq ($(USE_COPT),)
  USE_COPT = 
endif
# C++ specific options here (added to USE_OPT).
ifeq ($(USE_CPPOPT),)
  USE_CPPOPT = -fno-rtti
endif
# Enable this if you want the linker to remove unused code and data
ifeq ($(USE_LINK_GC),)
  USE_LINK_GC = yes
endif
# If enabled, this option allows to compile the application in THUMB mode.
ifeq ($(USE_THUMB),)
  USE_THUMB = yes
endif
# Enable this if you want to see the full log while compiling.
ifeq ($(USE_VERBOSE_COMPILE),)
  USE_VERBOSE_COMPILE = no
endif
#
# Build global options
##############################################################################
##############################################################################
# Architecture or project specific options
#
# Enables the use of FPU on Cortex-M4.
# Enable this if you really want to use the STM FWLib.
ifeq ($(USE_FPU),)
  USE_FPU = yes
endif
# Enable this if you really want to use the STM FWLib.
ifeq ($(USE_FWLIB),)
  USE_FWLIB = no
endif
#
# Architecture or project specific options
##############################################################################
##############################################################################
# Project, sources and paths
#
# Define project name here
PROJECT = ch
# Imported source files and paths
CHIBIOS = /path/to/your/chibios-rtGFXLIB = /path/to/your/ugfx
include $(CHIBIOS)/os/hal/platforms/STM32F4xx/platform.mk
include $(CHIBIOS)/os/hal/hal.mk
include $(CHIBIOS)/os/ports/GCC/ARMCMx/STM32F4xx/port.mk
include $(CHIBIOS)/os/kernel/kernel.mkinclude $(GFXLIB)/gfx.mk
include $(GFXLIB)/boards/base/Olimex-STM32-LCD/board.mk		# your board
# Define linker script file here
LDSCRIPT= $(PORTLD)/STM32F407xG.ld
#LDSCRIPT= $(PORTLD)/STM32F407xG_CCM.ld
# C sources that can be compiled in ARM or THUMB mode depending on the global
# setting.
CSRC =	$(PORTSRC) \
	$(KERNSRC) \
       	$(TESTSRC) \
       	$(HALSRC) \
       	$(PLATFORMSRC) \
       	$(BOARDSRC) \
	$(GFXSRC) \
       	$(CHIBIOS)/os/various/devices_lib/accel/lis302dl.c \
       	$(CHIBIOS)/os/various/chprintf.c \
	src/usb_shell.c \
       	main.c
# C++ sources that can be compiled in ARM or THUMB mode depending on the global
# setting.
CPPSRC =
# C sources to be compiled in ARM mode regardless of the global setting.
# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
#       option that results in lower performance and larger code size.
ACSRC =
# C++ sources to be compiled in ARM mode regardless of the global setting.
# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
#       option that results in lower performance and larger code size.
ACPPSRC =
# C sources to be compiled in THUMB mode regardless of the global setting.
# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
#       option that results in lower performance and larger code size.
TCSRC =
# C sources to be compiled in THUMB mode regardless of the global setting.
# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
#       option that results in lower performance and larger code size.
TCPPSRC =
# List ASM source files here
ASMSRC = $(PORTASM)
INCDIR = $(PORTINC) \
	 $(KERNINC) \
	 $(TESTINC) \
         $(HALINC) \
	 $(PLATFORMINC) \
	 $(BOARDINC) \
	 $(GFXINC) \
         $(CHIBIOS)/os/various/devices_lib/accel \
         $(CHIBIOS)/os/various \
	 include 
#
# Project, sources and paths
##############################################################################
##############################################################################
# Compiler settings
#
MCU  = cortex-m4
#TRGT = arm-elf-
TRGT = arm-none-eabi-
CC   = $(TRGT)gcc
CPPC = $(TRGT)g++
# Enable loading with g++ only if you need C++ runtime support.
# NOTE: You can use C++ even without C++ support if you are careful. C++
#       runtime support makes code size explode.
LD   = $(TRGT)gcc
#LD   = $(TRGT)g++
CP   = $(TRGT)objcopy
AS   = $(TRGT)gcc -x assembler-with-cpp
OD   = $(TRGT)objdump
HEX  = $(CP) -O ihex
BIN  = $(CP) -O binary
# ARM-specific options here
AOPT =
# THUMB-specific options here
TOPT = -mthumb -DTHUMB
# Define C warning options here
CWARN = -Wall -Wextra -Wstrict-prototypes
# Define C++ warning options here
CPPWARN = -Wall -Wextra
#
# Compiler settings
##############################################################################
##############################################################################
# Start of default section
#
# List all default C defines here, like -D_DEBUG=1
DDEFS =
# List all default ASM defines here, like -D_DEBUG=1
DADEFS =
# List all default directories to look for include files here
DINCDIR =
# List the default directory to look for the libraries here
DLIBDIR =
# List all default libraries here
DLIBS =
#
# End of default section
##############################################################################
##############################################################################
# Start of user section
#
# List all user C define here, like -D_DEBUG=1
UDEFS =
# Define ASM defines here
UADEFS =
# List all user directories here
UINCDIR =
# List the user directory to look for the libraries here
ULIBDIR =
# List all user libraries here
ULIBS = -lm
#
# End of user defines
##############################################################################
ifeq ($(USE_FPU),yes)
  USE_OPT += -mfloat-abi=softfp -mfpu=fpv4-sp-d16 -fsingle-precision-constant
  DDEFS += -DCORTEX_USE_FPU=TRUE
else
  DDEFS += -DCORTEX_USE_FPU=FALSE
endif
ifeq ($(USE_FWLIB),yes)
  include $(CHIBIOS)/ext/stm32lib/stm32lib.mk
  CSRC += $(STM32SRC)
  INCDIR += $(STM32INC)
  USE_OPT += -DUSE_STDPERIPH_DRIVER
endif
include $(CHIBIOS)/os/ports/GCC/ARMCMx/rules.mk